A 100% polyester needle felt breather bag designed for breathing applications such as venting hoppers and other contained vessels.
- Designed for breathing applications such as venting hoppers and other contained vessels
- The BFM® breather may become required as the BFM® connectors create a 100% sealed system.
FM1 Breather
A variety of installs showing BFM® connectors used in conjunction with BFM® Breather Bags.
HOCHDORF Group, one of the biggest milk processors in Switzerland, switched to BFM® fitting to clean up their processing system and make their changeovers much faster and safer for staff.
| Physical Properties | |
|---|---|
| Construction | Polyester multifilament scrim supported needle felt |
| Weight (g/m2) | 490-595 |
| Thickness (mm) | 2.16 |
| Air permeability (cc/cm2/[email protected] w.g.) | 5.0-7.5 |
| Bursting Strength (kg) | 52+ |
| Surface Treatment | Heat set and singed one side |
| Finish | PTFE Membrane |
| Temp - Continuous (C°) | 130° |
| Color | White |
Most common questions
The EN779 classifications are a standard for ventilation filters. These are intake filters on building, in hospitals and the like. Breather bags are made from a dust filter media, which are tested and specified differently. For this reason we cannot report on an unrelated classification. However, for a rough comparison, then the FM1 is 97% efficient @ 3microns, or F7. If the airflow or pressure is low the efficiency will increase. This then depends on surface area, particle size and type etc.
For more information view the FAQ