The Flexi-Light Connector is made from an ether based polyurethane with a lighter 316 stainless steel wire coil than our standard Flexi, making it ideal for applications with lateral and vertical movement. The Seeflex walls are also slightly thinner and the coil is much more flexible making it perfect for weigh-scale type applications, as it provides less resistance than our standard Flexi.

Complies with:

FDA CFR 177.1680, 21 CFR 175.105 (adhesives) and 177.2600. (EC) 1935/2004, 2023–2006, 2002/72/EC, USDA & 3A (20–27).

Key features/uses:

  • Very lightweight and flexible, CIP safe

  • Has compression ratio of approx. 3:1

  • Used for weigh-scale applications, bag feeders and for applications with irregular movement.

BFM fitting Flexi Light Connector
Physical Properties
Surface Finish Gloss/Gloss
Available Diameters (mm) 100, 150, 200, 250 & 300 / (inches) 4, 6, 8, 10, 12
Wall Thickness 0.4mm/ 1/32 inch
Temp Range - 20 to 85°C / - 4 to 185°F
Colour Transparent
Wire Coil Diameter 1.6mm / 1/16 inch
Wire Coil Position 50mm / 2 inches from cuff
Compression Ratio (Approx.) 3:1
Permeability 0

Most common questions

For more information view the FAQ