The BFM® Corner Connector is made from the same clear ether-based thermoplastic polyurethane alloy known as the Seeflex 040E - the most popular and versatile BFM® media.

Constructed with a tapered infeed end, 110º angled bend, and straight drain output end, it is designed to redirect the clean-in-place (CIP) wash fluid.

The BFM® Seeflex 040E Corner Connector ensures that your equipment stays dry and your product stays free from chemicals used to clean your process machinery.

Now also available in pressure-resistant Seeflex 060ES material

BFM Seeflex Corner Connector
Seeflex 040E Complies with:

FDA 21 CFR 177.1680 & 177.2600, USDA, (EC) 1935/2004, 2023–2006 & 10/2011

Atex Compliant: IBExU tested and can be used in all dust explosion hazardous areas. (Refer to our Certification & Compliance page for more information).

Corner Connector Calculator

To check the minimum allowable inlet height, and to calculate the total dimensions (from cuff to cuff) of available corner connector sizes, you can download the Corner Connector Calculator.


BFM fitting calculator for corner connector


  • Replaces the traditional steel tun-dish and swiveling pipework in the Clean-in-Place wash process
  • Designed for applications where product/material needs to be transported around a bend.
  • Ideal for under compact machinery with limited space. For instance, when redirecting product from a screener or sifter to another equipment.

Diameter 1 - wide (infeed) end: Ø125mm (5") to Ø650mm (26") in 50mm (2") increments

Diameter 2 - narrow (outlet) end: Ø100mm (4") to Ø600mm (24") in 50mm (2") increments

Length 1 - wide (infeed) end*: 200mm (8") to 650mm (26”) in 50mm (2") increments

Length 2 - narrow (outlet) end: 100mm (4") to 650mm (26") in 50mm (2") increments

(* Subject to minimum taper ratio lengths as per table on product spec sheet)



A separate connector for the CIP process, snapped into place for the wash cycle only.

Frequently asked questions

For more information view the FAQ